Simple Steps To Protect Your Home From Bursting Or Broken Pipes In Cold Weather

Plumbing Cost Estimator

The cost of a plumber ranges from $175 to $450 for a typical job with the average cost per hour ranging from $45 to $200. This can include jobs like repairing faucets, toilets, sinks or bathtubs. Depending on the job, some plumbers charge a flat rate, or service fee of $300 on average.

Plumbing Repair Cost Guide

Hiring a plumber costs an average between $175 and $450. Most jobs are billed hourly at $45 to $200 per hour. Labor is almost always going to be your biggest expense. The more involved the job, and the more that must be torn up, the costlier the project.

Slab Leak Repair Costs

Detecting a leak under your slab foundation costs anywhere from $125 to $400 and requires special equipment. Fixing an under slab leak averages $500 to $4,000. The total cost can run much higher based on project variables, including but not limited to:

The thickness of the slab

The depth of the leaking pipe

The type of flooring that must be removed and replaced

Rebar and/or vapor barrier removal

Slab leaks are leaks in pipes under the slab of the home. Fixing one requires flooring removal for access to the slab, jackhammering out portions of the foundation, digging down to the pipe, repairing or replacing it, and replacing the floor. Get a direct quote from a professional plumber.

Cost to Fix Leaking or Burst Pipes

Leaking pipes cost an average of $150 to $350 to repair, while diagnosing leak locations can add an additional $100. This doesn’t include repairing the wall after the fix. Drywall repair costs an additional $250 to $750 depending on the size and location of the hole.

Tips for Avoiding Broken Pipes This Spring

Rainy Weather Might Lead to Broken Pipes

Heavy spring rains can wreak havoc on your plumbing. Not only can all the water in the ground cause cracks in your water pipes, but too much rain can also cause your drainage system to back up. This is particularly common in places where the soil isn’t used to heavy rainfall— like the desert.

The soil in the desert isn’t very effective at absorbing large amounts of water, which has to go somewhere. The last place you want it going is into your plumbing system to cause expensive damage. Luckily, this article will tell you what to look out for and how you can prevent the spring rains from damaging your plumbing.

Pressure on Your Pipes

Many people don’t think that heavy rains can lead to damaged underground pipes, but it’s true. When the soil around your home absorbs lots of rain, like during spring showers, it can become heavy. If your pipes are old, worn, or poorly installed, the heavy soil can cause them to crack or break. If a break occurs, you could have a leak around your foundation that can cause serious structural damage to your home.

How to Avoid Broken Pipes

The best thing you can do to avoid a burst or broken pipe is to have your plumbing system assessed. Because it’s not easy to determine if your underground pipes are in danger of breaking, having a professional plumber take a look is often the only way to be sure. If you notice any changes in your water pressure, it’s best to shut off the water to your house until you or a plumber can figure out what the issue is.

It’s also a good idea to keep an eye out for:

An abnormally high water bill.

Sounds of flowing water when it is not in use.

Standing water around your home’s foundation.

Cracks in your foundation.

Water Leak Detection For Broken Pipes

I never thought about needing a water leak detection service, until I noticed my water bill had skyrocketed out of control! I checked everywhere, both inside and outside my home for a water leak, I couldn’t find anything.  I even called the utility company, they came back out to my home and check the water meter again, they said the meter was correct and the pipes on their side were working fine. Which means I must have a leak somewhere on my property.

They responded right away and inspected my home and yard for any water leaks. The technicians informed me water leaks account for 6 billion gallons of water wasted every day!

The technician was quickly able to locate a leak under my concrete slab without having to dig up my new flooring. He was also able to fix it in a very timely manner, leaving my home just as he found it and it didn’t break the bank.

specializes in detecting slab leaks in homes and businesses. Finding the source of damp or wet areas on your walls, ceilings, and other areas. By using advanced thermal imaging equipment and other electronic equipment they can help zero in on the source of the water intrusion, even if it is three floors away from the water stain.

Remember, “Today’s little leaks create tomorrow’s big emergencies”. I encourage you to look around your home and business for any signs of a water leak.

EMERGENCY PLUMBING TIPS

When a plumbing problem pops up, there’s no need to panic — you might not even need a plumber. There are a number of plumbing fixes any D.I.Y-er can accomplish with basic tools and a little know-how. Whether it’s a clogged drain, broken pipe, a leaking toilet or faucet, your local True Value Hardware store has you covered.

Preparedness is the name of the game. Water damage from broken pipes or leaking appliances can ruin entire rooms of furniture, walls and flooring and more. Routinely check your washing machine hoses and replace them if they appear old or cracked. Look for any signs of water under sinks, around fixtures and near appliances. Check ceilings and walls for any evidence of a roof leak. Make sure that all appliance connections are tight and not leaking

Keep items in your basement off of the floor where possible. If a pipe bursts and floods your basement, the damage will be minimized and you won’t lose any belongings.

Make sure you know how to turn off water to your fixtures and appliances when needed. Also, note the location of your home’s main water shutoff valve. It may come in handy if you’re unable to turn off water directly to an appliance or fixture, as shutting off the water main cuts off water to the entire building.

Stock up on basic plumbing tools ahead of time before you have a plumbing emergency. Here’s a list of items you should definitely have in your toolbox for plumbing repairs:

Pipe wrench

Adjustable (crescent) wrench

Basin wrench

Channel-lock pliers

Auger (“snake”)

Hacksaw

Screwdriver set

Nut driver or socket wrench

Plunger

Drain-cleaning tool

Plumbing Apprentice Resume Examples

Plumbing Apprentices provide assistance to full-fledged Plumbers while improving their skills. Common duties listed on a Plumbing Apprentice resume include cutting and assembling pipes, cleaning water supply and disposal systems, handing in tools, cleaning job sites, and answering to customer inquiries. Based on our most successful resume samples, these less-experienced workers should demonstrate the ability to follow guidelines, dexterity, customer service orientation, communication, and stamina. Most Plumbing Apprentices hold a high school or general education diploma.

Plumbing Apprentice

Trained hands-on under the care of a Licensed Plumber in commercial and residential settings.

Performed commercial and residential remodeling in offices, bathrooms, kitchens and basements.

Installed pipe assemblies, fittings, valves, appliances such as dishwashers, water heaters, stoves, sinks, tubs and toilets using power tools

Measured, cute, threaded and bent pipe to required angels using tools such as pipe-threading machines and pipe cutters.

Repaired and maintained commercial and residential plumbing by replacing or mending broken pipes and water leaks

Studied building plans and inspected them to assess material and equipment needs

Hung steel supports from ceiling joists

Plumbing Apprentice

Work alongside Licensed Plumber / Supervisor daily to complete projects/work orders quickly and efficiently.

Diagnosing problems and/or failures in plumbing systems (residential and commercial).

Installation/maintenance/repairs of various water and gas systems, pipes and fittings, and various s items. systems and/or components (e.g. toilets, sinks, vents, faucets, sewer lines, vacuum breakers, hot water heaters, water softeners, garbage disposals, etc.).

Testing for leaks in new and repaired systems with compressed air and/or water for the purpose of ensuring that items are functional and in safe working condition.

Operating equipment used in the maintenance and repair of water and gas plumbing fixtures and systems.

Working in various environmental conditions and elements (e.g. various temperatures, confined spaces, heights vary from ladder height to roof top, and sub terrain conditions.)

Plumbing Apprentice

Assisted Master Plumbers with construction, soldering, and brazing pipes

Transported tools, equipment, and supplies to job sites as needed

Monitored and maintained plumbing tools for safe operating conditions

Assembled and installed ceiling pipe brackets, while ensuring proper equipment and personnel safety

Licensed Plumbing Apprentice

Assisted in the code compliant assembly, installation and repair of plumbing, water flow and drainage systems.

Dug trenches for new pipelines; maintained and repaired all plumbing equipment such as drains and pipes.

Installed new hardware for faucets, showers and toilets in residential homes, commercial and industrial facilities.

Installed new plumbing equipment and systems for renovation and remodeling projects.

Repairs mechanical equipment when necessary.